Geotechnical
The Initial, Primary and Secondary Consolidation Response of Soft clay Reinforced with a Granular Column Under Isolated Loading
Author(s) Vinayagamoothy Sivakumar* M. Catherine Moorhead† Shane Donohue‡ Colin J. Serridge§ Snehasis Tripathy∥ John McKinley* Ciaran Doherty¶ Abstract This paper presents the assessment of consolidation and creep settlements of an isolated circular footing...
Effects of Urease-producing Bacteria on Permeability and Strength Control for Sands
Authore(s) Authors: S. Ikoma* T. Hata* J. Yoneda† K. Yamamoto‡ Abstract In the ground improvement field, microbially induced carbonate precipitation (MICP) is a novel bio-based soil improvement technique. To apply this technique, the presence of an actual...
Stress–strain Behaviour of Bio-desaturated Sand Under Undrained Monotonic and Cyclic Loading
Author(s) Kangda Wang, Jian Chu† Shifan Wu‡ Jia He§ Abstract Microbial (or bio-) desaturation is a new method for mitigation of the liquefaction hazard of sand. In this paper, a series of monotonic and cyclic triaxial tests was performed on bio-desaturated...
Ground Waste Glass–carbide Lime as a Sustainable Binder Stabilising Three Different Silica Sands
Author(s) Nilo Cesar Consoli, Mariana da Silva Carretta, Lucas Festugato, Helena Batista Leon, Lennon Ferreira Tomasi Abstract Waste glass is a solid residue usually available near urban centres, where it is discarded after being used as a container for one of...
Mechanical Behaviour of Rock Samples Containing Multiple Parallel Joints Euring shearing
Author(s) Authors: N. Huang*† G. Han‡ R. Liu‡§ Y. Jiang§ Abstract This study experimentally investigated the influence of number of joints on the mechanical behaviour of multi-joint samples during shearing under constant normal stiffness (CNS) boundary...
Geotechnical Properties of a New Transparent Clay
Author(s) Gangqiang Kong ; Yang Zhou, Ph.D ; Qing Yang ; Chengqing Wang Abstract This paper presents a study of the mechanical properties of a synthetic transparent clay to be used in physical geotechnical models. The manufacturing processes of a synthetic...
Numerical Simulation and Performance Assessment of Seepage Control Effect on the Fractured Surrounding Rock of the Wunonglong Underground Powerhouse
Author(s) Lifeng Wen ; Yanlong Li ; and Junrui Chai Abstract Seepage control is a key technical problem in large-scale underground cavern engineering, and seepage analysis plays an important role in realizing engineering optimization design and safety. The...
Application of Discrete-Element Numerical Simulation for Calculating the Stability of Dangerous Rock Mass: A Case Study
Author(s) Chong Shi ; Bo Yang ; Yiping Zhang ; and Junxiong Yang FULL TEXT Abstract An unstable rock mass is a common geological hazard in water conservancy and hydropower engineering in southwest China. The mechanical properties of a rock mass joint and the...
Interface Shear Behavior of Cementing Underground Mine Backfill
Author(s) Shuai Guo ; Mamadou Fall ; and Sada Haruna Abstract This paper presents the findings from an experimental investigation that was conducted to assess the shear behavior and the changes in the shear behavior and strength parameters for cemented paste...